Topic: Fuel Oil Co-Combustion

Paper

Evaluation of the Cement Clinker Fired in the Combustion Furnace of Heavy-Oil and NH3

By , , , , , , , and on October 31, 2018
In recent years, global warming caused by an increase in CO2 emission released by combustion of fossil fuel has become a big problem. To realize a low-carbon society, active use of renewable energy and promotion of hydrogen energy are necessary. We are participating in “SIP (Strategic Innovation Promotion Program) energy carriers”, developing technology to replace 30% fossil fuel with ammonia (NH3) on the calorie basis. Assuming that NH3 is used as a thermal energy for a cement kiln, we conducted the following two basic experiments. First, we fired the clinker in the atmosphere-controlled electric furnace, calculated the reaction rate of…

Paper

Optimization of the NOx Reduction Condition in the Combustion Furnace for the Combustion of “Heavy-Oil – NH3 System” Using CFD

By , , , and on October 31, 2018
In late years the discharge of the CO2 became the very big problem. The combustion of the fossil fuel in particular exhausts much CO2. Our project team (SIP) is intended to reduce CO2 by using NH3 (10%~30%) in substitution for heavy oil. The ‘SIP energy carriers’ was launched in 2014 (SIP: Strategic Innovation Promotion Program). Ammonia direct combustion team was formed. We conducted a co-research program with Osaka University in this project. We performed experiment of heavy oil – NH3 mixed combustion in the 10kW furnace. As the results, we obtained much experimental data. When we were combusted NH3 and…
Ammonia Energy Association
44927 George Washington Blvd, Ste 265
Ashburn, VA 20147 USA
Quick Links
LinkedIn
Twitter
Email
Copyright © 2019 Ammonia Energy Association. All Rights Reserved.